A25-60 C50
Automatic retractable bollard - Withstands the impact of a 3.5-tonne HGV at 50 km/h
Automatic retractable bollards
A25-60 C50
Automatic retractable bollard - Withstands the impact of a 3.5-tonne HGV at 50 km/h
Standard characteristics:
- Cylinder:
- Steel treated with zinc plating Ø 25 cm - height 60 cm
- Thermo-lacquering, RAL 7016 colour
- Stainless steel bollard top, thickness 20 mm
- Brush seal to prevent scratching on housing
- Class 2 reflective tape
- Frame:
- Stainless steel frame, thickness 6 mm
- Stainless steel floor plate, thickness 20 mm
- Lateral guide with HDPE sliders
- Steel installation casing with reinforcements
- Drive system:
- 230V hydraulic drive system integrated into the bollard frame in a compartment accessible without disassembling the bollard, with push-pull quick-release coupler
- Upper and lower limit switches integrated on a removable support, accessible without disassembling the bollard
- Biodegradable hydraulic oil with low viscosity variation
- Standards:
- NFP 98-310-compliant
- Dimensions compliant with the French Decree of 18/09/2012 on the technical specifications for accessibility of roads and public spaces
Standard equipment:
Security
- Additional connection cable length
- Heating system for cold weather or exposure to snow or frost conditions
- NC solenoid valve: Bollard freezes in position in the event of power failure
Customisation
- Choice of RAL colours
- Paint with seafront treatment
- Microblasted stainless steel finish
- LED strip on the bollard head
- Customisation of the bollard head
- Operation time : 4 to 6 seconds
- MCBF (number of cycles) : 2 000 000
- MTBF (hours) : 25 000
- MTTR (min) : 30 min
- Finishes : RAL 7016 steel colour
- Voltage : 230 V
- Power : 680 W
- Drive system : Integrated hydraulics
- Resistance : 311,000 J
- Behavior in case of power cut : Positive (gravity lowering system without electrical assistance in the event of power failure)
- Foundation dimensions (LxWxH) : 450 x 330 mm
- Overall dimensions (LxWxH) : 600 / 250 mm
- Operating temperature : -20°C to +50°C
- Connection cable : 10 m connection cable supplied
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
AR 7548
See the product
AR 7580
See the product
LBM 8
The easy-to-install, robust boom barrier. The LBM 8 works effortlessly thanks to its compression springs. Features a lateral operating handle and an arm locking system for added safety. Ideal for closing off little-used lanes, occasional access points or temporary path closures.
See the product
A25-60 C80
The ALE A25-60-C80 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 60 cm high and painted with RAL, the surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test, during which the bollard stopped a 1.75-tonne HGV travelling at 80km/h, with the bollard remaining operational after the impact and without vehicle entry, supplemented by a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, proving its ability to stop a 7.5-tonne HGV travelling at 64km/h.
See the product
TOTEM TDCA
The TDCA totem pole is a cylindrical piece with a diameter of 25 cm and a variable height between 160 and 250 cm. Made of steel, this totem is composed of several stackable modules to meet all operational needs. It can be fitted with traffic lights and access control equipment (LPR, intercom, badge reader, etc.)
See the product
RB90C65
The ALE RB90-C65 FP road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 90 cm in height, it is available in lengths of 2 to 4 m. The RB50 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. Its galvanised steel frame is just 50 cm high, so the device can be sealed in a 55 cm deep excavation. The bellows side is made of a flexible material that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered stainless steel sheets removable by a person working alone and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the RB90 does not contain any integrated sensitive elements. Its resistance is certified with a double crash test, during which the RB90 stopped two 7.5-tonne HGVs travelling consecutively at 64 km/h with the device remaining operational after the both impacts and without vehicle penetration, supplemented with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1 proving its ability to stop a 7.5-tonne HGV at 80 km/h.
See the product