Standard equipment
• Integrated logic with multi-programme control panel
• Local diagnostics and setting programming using multi-programme control panel on the machine
• Programme memory with SD card
• Integrated heating to prevent condensation
• Integrated mechanical sensors for recording information on the current barrier arm position (closed/open position)
• Acceleration and deceleration cycle control system, for setting the desired barrier opening and closing speed
• Body and port material: Sheet steel, 20/10 mm thick, cataphoresis treated, painted with polyester powder coating, heat-treated at 250 °C, painted in standard RAL 5015 colour (other colours available on request)
• Fibreglass arm, length of 2 to 6 metres, with reflective tape
• Mechanical bar position sensors
• Barrier control with multi-programmable control panel on the machine with Ethernet TCP/IP port
• Logic control locally or via Ethernet port
• Motor management by a frequency control converter (frequency converter with a power of 0.25 kW), for controlling:
• Acceleration and deceleration
• Opening and closing speed
• Double-geared reduction gear
• Power supply voltage 230 V +/- 20 V AC, 50 Hz +/- 2 Hz
• Limit values for wind loads. The design of the barrier drive ensures that the arm position is held at wind speeds of over 140 km/h