A25-100 C80
Automatic retractable bollard - Withstands the impact of a 7.2-tonne HGV at 80 km/h
The ALE A25-100-C80 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high, the bollard is lined with a microblasted stainless steel shell and can incorporate an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with IWA 14-1, during which the bollard stopped a 7.2-tonne HGV travelling at 80 m/h with the bollard remaining operational after the impact.
A25-100 C80
Height: 100 cm
Diameter: 25 cm

MAIN CHARACTERISTICS

Standard characteristics:
• Cylinder:
• Hot-dip galvanised steel Ø 25 cm - height 100 cm
• Microblasted stainless steel sleeve
• Stainless steel bollard top, thickness 20 mm
• Brush seal to prevent scratching on housing
• Class 2 reflective tape
• Frame:
• Heavy-gauge steel floor plate protected by a stainless steel cover plate
• Lateral guide with HDPE sliders and rollers
• Frame made of 10 mm thick galvanised steel
• M16 anchor bracket, strengthening connection to the concrete foundation
• Drive system:
• Remote hydraulic drive system (factory connected circuit), the bollard is supplied with 15 m of oil-filled reinforced pipes with push-pull type quick coupler
• Low limit switch integrated into the cylinder head, accessible without disassembling the bollard
• Biodegradable hydraulic oil with low viscosity variation
• Standards:
• NFP 98-310-compliant
• Dimensions compliant with the French Decree of 18/09/2012 on the accessibility of roads and public spaces
Standard equipment:
Security
• Upper limit switch
• Snap-off nuts to secure bollard access
• Heating system for cold weather or exposure to snow or frost conditions
• Cold weather oil
Customisation
• LED strip on the bollard head
• Choice of RAL colours on stainless steel
• Customisation on the bollard head
• Installation aid: Installation kit (steel cage foot hanger)

TECHNICAL SPECIFICATIONS

  • Operating time
4 to 6 s
  • MCBF (number of cycles)
2 000 000
  • MTBF (hours)
25,000 h
  • MTTR (min)
30 min
  • Finishes
Microblasted stainless steel
  • Concrete foundation dimensions (LxDxH)
430 x 430 mm
  • Overall dimensions (LxDxH)
1,000 mm / 250 mm
  • Operating temperature
-20°C to +50°C
  • IP rating
67
  • Drive system
Remote hydraulics
  • Impact resistance
1,777,000 J
  • Connection cable
15 m of hydraulic pipes supplied

Documents for download

Access all the documentation and business tools designed by LBA AMCO

we also recommend

R25-60

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

R14-70

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

R17-70

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

R20-70

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

R15-70

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

Discover our other ranges

Contact

Our experts are on hand to help you find the best flow management solution.

La Barrière Automatique
451 Chemin de Champivost
69760 Limonest
Tél : +33 (0)4 78 86 02 86

AMCO Les Escamotables
20 avenue de l’Aspre
30150 Roquemaure
Tél : +33 (0)4 66 33 25 70

Show Room
19 rue de la Trémoille
75008 Paris
Tél : +33 (0)1 48 28 57 78

Middle East

Italy

Nordic countries