A25-60-C50
Automatic retractable bollard - Withstands the impact of a 3.5-tonne HGV at 50 km/h
The A25-60 C50 retractable security bollard is made of steel, 25 cm in diameter and 60 cm high. A wide range of versions is available (LEDs, stainless steel). The frames and the surfaces exposed to tread are made of stainless steel, offering high tread resistance. Operational after a crash test with a 1.1-tonne car at 50 km/h, its resistance is supplemented by a digital crash test carried out by an independent Cofrac-approved body, during which the bollard stopped a 3.5-tonne HGV travelling at 48 km/h without vehicle entry. The drive system is integrated in a separate compartment, accessible without disassembling the bollard. It is also available with a remote hydraulic drive system.
A25-60-C50
Height: 60 cm
Diameter: 25 cm

MAIN CHARACTERISTICS

Standard characteristics:
• Cylinder:
• Steel treated with zinc plating Ø 25 cm - height 60 cm
• Thermo-lacquering, RAL 7016 colour
• Stainless steel bollard top, thickness 20 mm
• Brush seal to prevent scratching on housing
• Class 2 reflective tape
• Frame:
• Stainless steel frame, thickness 6 mm
• Stainless steel floor plate, thickness 20 mm
• Lateral guide with HDPE sliders
• Steel installation casing with reinforcements
• Drive system:
• 230V hydraulic drive system integrated into the bollard frame in a compartment accessible without disassembling the bollard, with push-pull quick-release coupler
• Upper and lower limit switches integrated on a removable support, accessible without disassembling the bollard
• Biodegradable hydraulic oil with low viscosity variation
• Standards:
• NFP 98-310-compliant
• Dimensions compliant with the French Decree of 18/09/2012 on the technical specifications for accessibility of roads and public spaces
Standard equipment:
Security
• Additional connection cable length
• Heating system for cold weather or exposure to snow or frost conditions
• NC solenoid valve: Bollard freezes in position in the event of power failure
Customisation
• Choice of RAL colours
• Paint with seafront treatment
- Microblasted stainless steel finish
• LED strip on the bollard head
• Customisation of the bollard head

TECHNICAL SPECIFICATIONS

  • Operating time
4 to 6 seconds
  • MCBF (number of cycles)
2 000 000
  • MTBF (hours)
25 000
  • MTTR (min)
30 min
  • Finishes
RAL 7016 steel colour
  • Concrete foundation dimensions (LxDxH)
450 x 330 mm
  • Overall dimensions (LxDxH)
600 / 250 mm
  • Operating temperature
-20°C to +50°C
  • Voltage
230 V
  • Power
680 W
  • Drive system
Integrated hydraulics
  • Impact resistance
311,000 J
  • Power outage behaviour
Positive (gravity lowering system without electrical assistance in the event of power failure)
  • Connection cable
10 m connection cable supplied

Documents for download

Access all the documentation and business tools designed by LBA AMCO

we also recommend

R25-60

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

R14-70

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

R17-70

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

R20-70

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

R15-70

Removable bollard to demarcate pedestrian areas while allowing occasional access to closed areas.

Discover our other ranges

Contact

Our experts are on hand to help you find the best flow management solution.

La Barrière Automatique
451 Chemin de Champivost
69760 Limonest
Tél : +33 (0)4 78 86 02 86

AMCO Les Escamotables
20 avenue de l’Aspre
30150 Roquemaure
Tél : +33 (0)4 66 33 25 70

Show Room
19 rue de la Trémoille
75008 Paris
Tél : +33 (0)1 48 28 57 78

Middle East

Italy

Nordic countries