A25-90 C50 - Automatic retractable bollard - Withstands the impact of a 7.5 HGV at 80 km/h

A25-90 C50

Automatic retractable bollard - Withstands the impact of a 7.5 HGV at 80 km/h

The ALE A25-90-C50 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 90 cm high and painted with RAL, the surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a double crash test, during which the bollard stopped two 7.5-tonne HGVs travelling consecutively at 48 then 80 km/h, with the bollard remaining operational after both impacts.

A25-90 C50

Height: 90 cm

Diameter: 25 cm

Crash test

Request a quote

Product description

Product data sheet

Continuous and intensive operation: 3,000 cycles/day

No sensitive elements in the bollard frame

Surfaces exposed to tread made of stainless steel

Operational after a double crash test

Low and simplified maintenance

Continuous and intensive operation: 3,000 cycles/day

No sensitive elements in the bollard frame

Surfaces exposed to tread made of stainless steel

Operational after a double crash test

Low and simplified maintenance

MAIN CHARACTERISTICS

Standard characteristics:
• Cylinder:
• Steel treated with zinc plating and epoxy powder coating Ø 25 cm - height 90 cm
• RAL 7016 colour
• Stainless steel bollard top, thickness 20 mm
• Brush seal to prevent scratching on housing
• Class 2 reflective tape
• Frame:
• Heavy-gauge steel floor plate protected by a stainless steel cover plate
• Frame made of 6 mm thick galvanised steel
• Lateral guide with HDPE sliders and rollers
• M16 anchor bracket, strengthening connection to the concrete foundation
• Drive system:
• Remote hydraulic drive (factory connected circuit), the bollard is supplied with 15 m of oil-filled reinforced pipes with push-pull type quick coupler
• Low limit switch integrated into the cylinder head, accessible without disassembling the bollard
• Biodegradable hydraulic oil with low viscosity variation
• Standards:
• NFP 98-310-compliant
• Dimensions compliant with the French Decree of 18/09/2012 on the accessibility of roads and public spaces
Optional features:
Security
• Upper limit switch
• Snap-off nuts to secure bollard access
• Heating system for cold weather or exposure to snow or frost conditions
• Cold weather oil
Customisation
• Choice of RAL colours
• Paint with seafront treatment
• Customisation on the bollard head
• Installation aid: Installation kit (steel cage foot hanger)